Function Parameter - Konica Minolta FK-502 Service Manual

FUNCTION PARAMETER SETTING
3.2.4

Function Parameter

<Operational Procedure>
(1) See "3.1.3 How to Enter the Service Mode" to indicate the [Service mode setting] screen.
(2) Press the [FAX] key.
(3) Press the [Function Parameter Setting] key.
(4) Select the address and then, enter the address using [A] - [F] key or keypad.
A Cursor is movable if
(5) Next, select the data and enter a value using binary numbers with keypad.
(6) When the address and the value are correct, press the [Decision] key.
(7) After the settings have been completed, press the [END] key.
Note: See "9.1. ADDRESS PARAMETER LIST" for the list of address parameters.
3-14
or is pushed.
FK-502/Network Fax Service Manual Ver.3.0