Konica Minolta FK-502 Service Manual page 118

In case of bizhub C352/C300/C252/C250
6-10
8. Remove the shield cover. (15 screws)
9. Open the tab of the memory slot of the MFP control
board (PWB-MFPC) and remove the memory.
NOTE
• When reinstalling the memory, take note of
the direction in which the DIMM is inserted.
And be sure to insert it securely until the tabs
on both sides of the slot are set fully into the
notches on the DIMM side.
• Reinstall the above parts following the
removal steps in reverse.
Tab
FK-502/Network Fax Service Manual Ver.3.0