Lcd Message List - Olivetti d-color MF1600 Service Manual

Multifunctional colour printer
Hide thumbs Also See for d-color MF1600:
Table of Contents

Advertisement

6.5.1 LCD Message List

(1) Status. Warning. Alarm
(1)-(a) Status during idle mode
The Staus Warning Alarm list is recorded in table 7-1-1.
No.
Level
This message appears immediately after power is turned
on and before the CU firmware starts up.
1
Initializing
The controller is being initialized.
"OKI PRINTING SOLUTIONS" Logo is displayed.
2
Initializing
The controller's EEPROM is being reset.
The EEPROM is reset under one of the conditions below.
• Change of CU ROM (CU F/W version is detected unmatched)
3
Initializing
• Change of destination
• Forced initialization of EEPROM (system maintenance
menu)
• OEM set by PJL command
RAM check is in progress. The number (nnn) in Line 2
represents the percentage of checked capacity against the
4
Initializing
total capacity.
The PU firmware is starting up in Loader mode.
This error may occur in a user environment. In that case,
5
Initializing
the printer requires servicing by an engineer (equivalent to
S/C).
Communications with PU firmware has failed.
This error may occur in a user environment. In that case,
6
Initializing
the printer needs servicing by an engineer (equivalent to
S/C).
The printer has started up in always online mode.
When it's started up in this mode, if an error occurs after
it has entered online state (ready), the printer processes
data (job) from an external device (host).
7
Initializing
On the panel, an error or a warning is displayed.
To enter this mode, turn on power while holding down
Right, Left, and Down keys.
This key combination is not disclosed to users, this status
does not occur in a user environment.
Network initializing is in progress.
8
Initializing
116
Table 7-1-1 Staus Warning Alarm list
Function
Service Manual
Status Message
1
Initializing
2
3
4
5
1
"OKI PRINTING SOLUTION"
2
Bitmap Image
3
4
5
1
EEPROM Reset
2
3
4
5
1
RAM Check
2
nnn%
3
4
5
1
PU Flash Error
2
3
4
5
1
Communication Error
2
3
4
5
1
Status Mode
2
3
4
5
1
Wait a Moment
2
Network Initializing
3
4
5
PJLStatus
Code
-
-
-
-
-
-
-
30993
Y108500-4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D-color mf2000

Table of Contents