Olivetti d-color MF1600 Service Manual page 126

No. Level
The printer has detected an OKIDATA toner cartridge with
RFID Region ID unmatched and Group ID matched.
If it is replaced with an OKIDATA toner cartridge with
Region ID matched, the printer will be restored.
78 Error %COLOR%
Yellow
Magenta
Cyan
Black
%COLOR% waste toner is full and toner needs
replacement.
%COLOR%
Yellow
Magenta
Error
79 Cyan
(This doesn't occur in case of Black toner.)
When a cover is opened and closed, the status changes to
a warning, enabling printing up to about 50 sheets.
Pressing the Start button displays the function select
screen.
One of the following has occurred.
•The toner sensor has detected a problem.
•No toner cartridge is installed.
•The toner cartridge lever is left unlocked.
•The image drum is not set in place.
This status appears only in Factory mode. If this error is
80 Error
detected in Shipping mode, it is displayed as a warning.
%COLOR%
Yellow
Magenta
Cyan
Black
Waste toner is full.
When a cover is opened and closed, the status changes to
a warning once.
81 Error
A further error occurs after printing 500 sheets.
Pressing the Start button enables moving to the function
select screen.
It notifies expiration of the life of the transfer belt.
The counter shows that the belt has reached the end of its
life. Printing is interrupted.
82 Error When a cover is opened and closed, the status changes to
a warning.
Pressing the Start button displays the function select
screen.
This notifies expiration of the life of the fuser. The counter
shows that the fuser has reached the end of its life. Printing
is interrupted.
83 Error When a cover is opened and closed, the status changes to
a warning.
Pressing the Start button displays the function select
screen.
126
Function
Service Manual
Status Message
1
2 Toner Regional Mismatch
3 %COLOR%
4
5
1
2 Replace Toner
3 %COLOR% Waste Toner Full
4 Continue
5 Press Start Button
1
2 Check Toner Cartridge
3 %COLOR%
4 Toner Sensor Error
5
1
2 Replace Belt
3 Belt Unit Life
4 Continue
5 Press Start Button
1
2 Install New Belt Unit
3 Belt Unit Life
4 Continue
5 Press Start Button
1
2 Install New Fuser Unit
3 Fuser Unit Life
4 Continue
5 Press Start Button
PJLStatus
Code
40947(K)
40948(Y)
40949(M)
40950(C)
40956(Y)
40957(M)
40958(C)
40959(K)
40960(Y)
40961(M)
40962～C)
40964
40970
40971
Y108500-4