5.5 Cleaning the inside of the MFP
CLEANINg THE INSIDE OF THE MFP
According to printing patterns, the metal shaft between fuser and cyan image drum cartridge
may be stained with toner. If this happens, please clean your printer.
(1) Switch off the power supply.
(2) Lift the scanner.
(3) Press OPEN button and open the top cover.
The fuser unit is extremely hot. Do not touch it.
(4) Take out the image drum cartridge.
1. Take out the 4 image drum cartridges and put them on a flat surface.
2. Cover the 4 image drum cartridges with black paper.
Note!
• The image drum (the green cylinder) is very easy to be damaged, please be careful
when handling it.
• Don't put the image drum cartridges in direct sunlight or strong light (above1500 lux).
And don't put them in indoor lighting condition for more than 5 minutes.
Y108500-4
I
O
Personal injuries may occur.
Service Manual
OPEN button
111