Olivetti d-color MF1600 Service Manual page 112

(5) Take out the fuser unit.
The fuser unit is extremely hot. Be careful not to touch it. If the
fuser unit is hot, do not try yourself to clear paper but wait until the
fuser unit becomes cool.
1. Pull the 2 blue lock levers of the fuser unit in the direction of the arrows.
2. Hold the handle of the fuser unit and take it out.
(6) Use soft cloths or tissue paper to wipe the metal shaft.
(7) Set the fuser unit.
For more detailed information, please refer to the Users' Manual Setup part, [Change the
fuser unit].
(8) gently put the 4 image drum cartridges back into your MFP.
(9) Close the top cover.
(10)Lower the scanner.
112
Personal injuries may occur.
Handle
Fuser unit lock lever (blue)
Shaft
Service Manual
Fuser unit
lock lever
(blue)
Y108500-4