Olivetti d-color MF1600 Service Manual page 24

(4) Up and Down Movements of ID Units
1. The up and down movements of the ID units are performed by the drive of the lift-up
motor.
2. Figure 2-5 shows movements of each ID unit at the time of printing. When the lift-up
motor turns clockwise, the lift-up link slides to the left and each ID unit is in the state of
down as shown in Figure 2-6. That condition enables color printing.
3. Figure 2-6 shows movements of each ID unit at the time of monochrome printing. When
the lift-up motor turns counterclockwise, the lift-up link slides to the right and the units
other than K-ID are in the state of up as shown in Figure 2-7. That condition enables
monochrome printing.
Movement of each ID unit at the time of color printing
C-ID unit down
M-ID unit down
Y-ID unit down
K-ID unit down
Movement of each ID unit at the time of monochrome printing
C-ID unit lift-up
M-ID unit lift-up
Y-ID unit
K-ID unit
24
Lift-up motor
(clockwise turn)
lift-up
down
Lift-up motor
(counterclockwise turn)
Service Manual
M-ID unit
C-ID unit
Figure 2-5
M-ID unit
C-ID unit
Figure 2-6
Y-ID unit K-ID unit
Y-ID unit K-ID unit
Y108500-4