Removing Adf Assembly - Olivetti d-color MF1600 Service Manual

4.2.2.6 Removing ADF Assembly

(1) Remove the two screws(black) to remove the base stopper upward at an angle.
Note: Unlike the other screws used in the printer, the screws
are long.
(Long type)
(2) Reverse the scanner and put the stays L and R upright.
(3) Remove the six screws(black) and then the MPCBA cover .
(4) Unfix the ground wire by removing the screw(black).
(5) Remove the ADF connector.
Lower
ADF connector
64 Service Manual Y108500-4