Olivetti d-color MF1600 Service Manual page 149

No. Level
Scanner controller error has occurred.
182 Error
Home position error has occurred.
183 Error
The lock for CCD transport is on.
184 Error
ADF jam has occurred while the printer is reading a
document.
185 Error A paper jam or misfeed occurred while the ADF was
feeding a document.
A timeout has occurred during busy status monitoring of
the scanner unit.
%n% in the LCD message and "x" at the end of PJL Status
Code represent the information below.
0: ReadData size=0
186 Error
1: Waiting for ReadData PageOut
2: Canceling in progress
3: PowerSave restoration in progress
4: Black Mark detection in progress
5: ADF forced discharge in progress
An unsupported size is specified for Tray 1 and Manual
Feeder.
If photocopying is started with the unsupported size
187 Error specified, the photocopying is interrupted.
%TRAY% represents the tray in which paper of an
unsupported size is loaded ("Tray 1" or "Manual Feeder"
for PX732MFP).
It provides the steps for photocopying using Manual
Feeder.
Pressing the Start button starts printer document reading.
188 Error
Pressing the Stop button interrupts photocopying.
If a document is left in the ADF, this message appears
every time one photocopy page is printed out.
Firmware has not been downloaded to the fax board.
189 Error
Search on a DHCP server has failed.
Scanning to E-mail/network PC is disabled.
190 Error
Y108500-4
Function
Service Manual
Status Message
1 (Function name)
2 Power Off/On
3 Scanner Controller Error
4
5 Press Left Key
1 (Function name)
2 Power Off/On
3 Home Position Error
4
5 Press Left Key
1 (Function name)
2 Power Off/On
3 Check Sensor Lock Switch
4 Scanner Sensor Locked
5 Press Left Key
1 (Function name)
2 Open ADF Cover
3 ADF Document Jam
4
5
1 (Function name)
2 Power Off/On
3 Scanner Timeout Error %n%
4
5 Press Left Key
1 Copy
2 Unsupported Size in %TRAY%
3
4 Continue
5 Press Start Button
1 Copy
2 Install Paper in Manual Feeder
3 Press Start Button to Continue
4
5 Press Stop Button to Cancel
1 (Function name)
2 Check Fax Firmware
3 Fax Firmware Error
4
5
1 (Function name)
2 Check DHCP Settings
3 Getting IP Address Failed
4
5 Press Left Key
PJLStatus
Code
40785
40786
40787
40789
4079x
4080y
40810
40811
40812
149