Top Cover Assembly - Olivetti d-color MF1600 Service Manual

4.2.3.5 Top cover assembly

(1) Remove the scanner. (See 4.2.1)
(2) Open the top cover.
(3) Remove the left side cover. (See Subsection 4.2.3.1)
(4) Remove the right side cover. (See Subsection 4.2.3.2)
(5) Remove the rear cover. (See Subsection 4.2.3.3)
(6) Remove the plate heat. (See Subsection 4.2.3.18)
(7) Remove the plate shield front. (See Subsection 4.2.3.16)
(8) Remove a screw (silver)
(9) Remove the M32-PCB (main board) (See Subsection 4.2.3.23), and then, remove the head
cable (FFC) and the RFID cable.
(10) Remove two E-type retaining rings
ViewA
BLA-PCB
(Main circuit board PCB)
Y108500-4
.
two sprint torsions
ViewA
Service Manual
and the top cover assembly
Head cable(FFC)
K
RFID
.
C
M
Y
71