Table of Contents
Advertisement
5
5.2
Cannot configure settings/cannot send faxes according to the
settings
Check the following items when you cannot configure settings of the fax driver or cannot send a fax accord-
ing to the settings you have configured.
Reference
-
Some items for the fax driver may not be configured simultaneously.
Problem
Cannot select items in the FAX
driver printing preferences dia-
log box.
A "conflict" message saying
"unable to configure" or "func-
tion will be canceled" appears.
Cannot send a fax according to
the settings you have config-
ured.
No watermark is printed.
5.2.1
Error message
Message
Cannot connect to the network
5-4
Cannot configure settings/cannot send faxes according to the settings
Possible Cause
Some functions cannot be com-
bined.
You are trying to configure the
functions that cannot be com-
bined.
The settings may not be config-
ured correctly.
The selected functions can be
combined in the fax driver, but
not on this machine.
The paper size or paper orienta-
tion specified in the application
may take precedence over the
settings in the fax driver when
sending a fax.
The watermark settings may not
be configured correctly.
The density of the watermark
may be too light.
Some graphic applications do
not print watermarks.
Cause and remedy
A connection to the network was not able to be established. Make sure
that the network cable is correctly connected. In addition, make sure
that [Network Settings] in [Administrator Settings] have been correctly
configured.
Remedy
Grayed out items cannot be con-
figured.
Check carefully the functions you
have specified, and then specify
the functions that can be com-
bined.
Check the setting of each item of
the fax driver.
Configure settings in the applica-
tion correctly.
Check the watermark settings.
Check the density setting.
When using such a program, the
watermark cannot be printed.
d-Color MF360/280/220
5.2
Advertisement
Table of Contents
