Olivetti d-color MF1600 Service Manual page 117

No. Level
This prompts the user to enter a PIN ID.
9 Normal
This prompts the user to enter an Admin Password.
This appears when moving to the Admin/Boot Menu.
10 Normal After the message is displayed for 3 sec., the Screen Entry
screen appears.
Automatic color registration correction is in progress.
11 Normal
The printer has entered power save mode.When it has
entered power save mode, the LCD backlight goes out.
When it has exited the mode, the backlight lights up. If
12 Normal a button is pressed while the backlight is off (in power
save mode), the backlight lights up and goes out 30 sec.
later, but the printer doesn't exit power save mode. The
backlight stays on during shutdown.
Access Control function has been enabled.
13 Normal
Access Control function has been disabled.
14 Normal
Document is being discharged.
15 Normal
The life of the image drum is nearing its end.
The printer can print until Image Drum Life error occurs.
%COLOR%
16 Warning Yellow
Magenta
Cyan
Black
The life of the transfer belt has expired (warning).
It is only a warning (not a life error).
This status message appears if a cover is opened and
17 Warning
closed after the transfer belt life error has occurred.
This occurs instead of the transfer belt life error if "BELT
LIFE PRINT CONTINUE" is on.
Y108500-4
Function
Service Manual
Status Message
1 Enter PIN
2
3
4
5
1 Enter Password
2
3
4
5
1
2 Adjusting Color
3
4
5
1 Power Save
2
3
4
5
1 Access Control
2 Enabled
3
4
5
1 Access Control
2 Disabled
3
4
5
1
2 Wait a Moment
3 Removing Document
4
5
1
2 %COLOR% Image Drum Near
3 Life
4
5
Press Start Button
1
2 Change Belt Unit
3
4
5 Press Start Button
PJLStatus
Code
-
-
10058
10094
10843
10844
10848
10076(K)
10077(Y)
10078(M)
10079 (C)
10080
117