Olivetti d-color MF1600 Service Manual page 129

(1)-(b) Status during execution of functions
No. Level
The printer is erasing the flash memory.
The memory is not erased unless a clear instruction, e.g.,
PJL command, is given.
1 Initializing
The PJL command for erasing flash memory is not
disclosed to users. Therefore, this status doesn't occur in
a user environment.
The network is in initializing
2 Initializing
The printer is waiting for the user to execute the function.
When the Start key is pressed, Push Scan begins.
3 Normal
Displays that connecting to PC.
4 Normal
The printer is warming up.
5 Normal
(1) As the printer has been instructed to cancel the job, it is
receiving and discarding data until the end of the job.
(2) A paper jam has occurred while jam recovery function
is off.
As the printer has been instructed to cancel the job, it is
receiving and discarding data until the end of the job.
(3) The printer is canceling an unauthorized print job
6 Normal (relating to JobAccount).
1. Received a job from a user not authorized to print.
2. Received a color print job from a user not authorized
to do color printing.
(4) The printer is canceling the job as the log storage
area in the 732 MFP is full and because the action in
case of log full is set to "cancel the job" (relating to
JobAccount).
The printer is printing out a menu map.
7 Normal
The printer is printing out a demo page.
8 Normal
Y108500-4
Function
Service Manual
Status Message
1 Flash Memory Erase
2
3
4
5
1 Print
2 Wait a Moment
3 Network Initializing
4
5
1 PC
2 Set Doc. and Press Start Button
3
4
5
1 PC
2 Connecting PC
3
4
5
1 Print
□
2
3 Adjusting Temp
4
5
1 Print
2 Canceling
3
4
5
1 Print
2 Print Configuration
3
4
5
1 Print
2 Print Demo Page
3
4
5
PJLStatus
Code
-
30993
-
10003
10007
10014
10017
129