2.2 Printing Process
The paper feeded from tray 1 is transported by the resist roller L and transport roller. When the
paper is feeded by the manual feeder, it is transported by the resist roller U. Then, the paper
transported is developed into a toner image not yet fused on the paper through electronic
photography process in the order of KYMC. After that, the image is fused by heat and pressure
while passing through the fusing unit. After fusing, the paper is discharged on the face up or
face down stacker through the discharge method opted by opening or shutting of the face up
stacker.
Heat roller
Halogen lamp
Backup roller
Transport belt
Resist roller U
Belt
Resist roller L
Paper feeding roller
Sub roller
Y108500-4
Service Manual
21