Removing Adf Pcba - Olivetti d-color MF1600 Service Manual

4.2.2.3 Removing ADF PCBA

(1) Gently open the ADF top cover.
(2) Remove the two screws(black)
(3) Remove the two screws(black)
(4) Turn the lever in the direction of the arrow to put the frame Assembly
upright.
(5) Remove the two screws(black)
(6) Restore the frame Assembly
(7) Release the frame Assembly
scanner to remove the Assembly and the paper tray
(8) Remove the three screws(black)
(9) Unplug all the connectors and remove the ADF PCBA
ADF top Cover
Lever
Y108500-4
to remove the cover-gear
.
.
and the paper tray in their original positions.
from the hook near its supporting point on each side of the
.
to remove the ground plate
Service Manual
.
and the paper tray
, and .
.
61