Udld Commands; Show Command - Quanta Computer T5016-LB8D Use Manual

UANTA COMPUTER INC.

6.27 UDLD Commands

6.27.1 Show command

6.27.1.1 show udld
Show UDLD information in all interfaces or specific interface
Syntax
show udld {< slot/port>}
<slot/port> - The interface number.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Port enable operational state: Specifies the Port Enable Operational State of the selected port.
Current bidirectional state: Specifies the Bidirectional State of the selected port.
Current operational state: Specifies the runtime Operational State of the selected port. This
section will be hidden if the port doesn't enable udld.
Message interval: Specifies the runtime Message Interval of the selected port. This section will be
hidden if the port doesn't enable udld.
Timeout interval: Specifies the runtime Timeout Interval of the selected port. This section will be
hidden if the port doesn't enable udld.
Remote Entry: Display all the remote entry information if received.
Expiration time: Specifies the runtime Expiration Time of the remote entry.
Device ID: Specifies the Device Id associated with the remote system.
Device Name: Specifies the Device Name associated with the remote system.
Port ID: Specifies the Port Id associated with the remote system.
Neighbor echo device: Specifies the Device Id included in Echo TLV associated with the remote
system.
Neighbor echo port: Specifies the port Id included in Echo TLV associated with the remote system.
Message interval: Specifies the Message Interval associated with the remote system.
Timeout interval: Specifies the Message Interval associated with the remote system.
CDP Device Name: Specifies the CDP Device Name associated with the remote system.
_____________________________________________________________________________
LB9 User's Guide
Layer 2/3/4 Managed Switch
661/1523