UANTA COMPUTER INC.
6.21.2 Configuration Commands
6.21.2.1 mac access-list extended
This command creates a MAC Access Control List (ACL) identified by <name>, consisting of
classification fields defined for the Layer 2 header of an Ethernet frame. The <name> parameter is a
case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying the MAC access list. If a
MAC ACL by this name already exists, this command enters Mac-Access-List config mode to allow
updating the existing ACL.
Syntax
mac access-list extended <name>
no mac access-list extended <name>
<name> - It uniquely identifies the MAC access list.
Default Setting
None
Command Mode
Global Config
_____________________________________________________________________________
LB9 User's Guide
Layer 2/3/4 Managed Switch
617/1523