Port Security Configuration Commands - Quanta Computer T5016-LB8D Use Manual

UANTA COMPUTER INC.

6.8.7 Port Security Configuration Commands

6.8.7.1 port-security
This command enables port locking at the system level (Global Config) or port level (Interface Config).
Syntax
port-security
no port-security
Default Setting
None
Command Mode
Global Config
Interface Config
6.8.7.2 port-security max-dynamic
This command sets the maximum of dynamically locked MAC addresses allowed on a specific port.
Syntax
port-security max-dynamic [<0-600>]
no port-security max-dynamic
no - This command resets the maximum of dynamically locked MAC addresses allowed on a
specific port to its default value.
Default Setting
600
Command Mode
Interface Config
_____________________________________________________________________________
LB9 User's Guide
Layer 2/3/4 Managed Switch
420/1523