Auto-Voice Over Ip Commands - Quanta Computer T5016-LB8D Use Manual

UANTA COMPUTER INC.

6.24 Auto-Voice over IP Commands

This section describes the commands you use to configure Auto-Voice over IP (VoIP) commands. The
Auto-VoIP feature explicitly matches VoIP streams in Ethernet switches and provides them with a better
class-of-service than ordinary traffic. When you enable the Auto-VoIP feature on an interface, the
interface scans incoming traffic for the following call-control protocols:

Session Initiation Protocol (SIP)

H.323

Skinny Client Control Protocol (SCCP)
When a call-control protocol is detected, the switch assigns the traffic in that session to the highest CoS
queue, which is generally used for time-sensitive traffic.
_____________________________________________________________________________
LB9 User's Guide
Layer 2/3/4 Managed Switch
641/1523