Managing Ddns Function - Quanta Computer T5016-LB8D Use Manual

Layer 2/3/4 managed switch
Table of Contents

Advertisement

UANTA COMPUTER INC.

11.2.18 Managing DDNS Function

11.2.18.1 Configuring DDNS Configuration Page
The DDNS protocol provides user to update IP address of the specified host name to the DDNS
provider.
Selection Criteria
DDNS Host - Selects the DDNS Host for which data is to be displayed or configured. If the add item
is selected, a new DDNS Host can be configured.
Server Type - Selects the server type of DDNS server. You can choose any of the following type
-
EASYDNS
-
DYNDNS
-
DHS
-
ODS
-
DYNS
-
ZONEEDIT
-
TZO
Configurable Data
Host Name - The hostname you want to be updated. Length is must equal or less than 253.
User Name - The account registered on DDNS server. Length is must equal or less than 32.
Password - The password of the account. Length is must equal or less than 32.
IP Address - The IP address you want to be updated.
Server IP - If this option is selected, the IP Address will be set to In-Band Mgmt IP address.
Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is performed.
Remove - Remove the selected DDNS configuration.
_____________________________________________________________________________
LB9 User's Guide
Layer 2/3/4 Managed Switch
1105/1523

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

T3040-ly3T3048-ly2T1048-lb9T1048-lb9a

Table of Contents