Dot1X Configuration Commands - Quanta Computer T5016-LB8D Use Manual

UANTA COMPUTER INC.

6.8.3 Dot1x Configuration Commands

6.8.3.1 dynamic-vlan
This command enable dot1x dynamic vlan creation configuration.
Syntax
dot1x dynamic-vlan enable
no dot1x dynamic-vlan enable
Default Setting
None
Command Mode
Global Config
6.8.3.2 dot1x port-control
This command sets the authentication mode to be used on all ports. The control mode may be one of the
following.
force-unauthorized: The authenticator PAE unconditionally sets the controlled port to unauthorized.
force-authorized: The authenticator PAE unconditionally sets the controlled port to authorized.
auto: The authenticator PAE sets the controlled port mode to reflect the outcome of the authentication
exchanges between the supplicant, authenticator, and the authentication server.
mac-based: The authenticator PAE sets the controlled port mode to reflect the outcome of the
authentication exchanges between the supplicant, authenticator, and the authentication server on a per
supplicant basis.
Syntax
dot1x port-control all {auto | force-authorized | force-unauthorized | mac-based}
no dot1x port-control all
all - All interfaces.
no - This command sets the authentication mode to be used on all ports to 'auto'.
Default Setting
auto
Command Mode
_____________________________________________________________________________
LB9 User's Guide
Layer 2/3/4 Managed Switch
357/1523