Time Range Commands - Quanta Computer T5016-LB8D Use Manual

Layer 2/3/4 managed switch
Table of Contents

Advertisement

UANTA COMPUTER INC.

6.3.16 Time Range Commands

Time-based ACLs allow one or more rules within an ACL to be based on time. Each ACL rule within an
ACL except for the implicit deny all rule can be configured to be active and operational only during a
specific time period. The time range commands allow you to define specific times of the day and week in
order to implement time-based ACLs. The time range is identified by a name and can then be referenced
by an ACL rule defined with in an ACL.
6.3.16.1 Show Commands
6.3.16.1.1 show time-range
Use this command to display a time range and all the absolute/periodic time entries that are defined for
the time range. Use the name parameter to identify a specific time range to display. When name
is not specified, all the time ranges defined in the system are displayed.
Syntax
show time-range [<name>]
<name> - time-range name.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Number of Time Ranges: Number of time ranges configured in the system.
Time Range Name: Name of the time range.
Time Range Status: Status of the time range (active/inactive).
Absolute start: Start time and day for absolute time entry.
Absolute end: End time and day for absolute time entry.
Periodic Entries: Number of periodic entries in a time-range.
Periodic start: Start time and day for periodic entry.
Periodic end: End time and day for periodic entry.
_____________________________________________________________________________
LB9 User's Guide
Layer 2/3/4 Managed Switch
267/1523

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

T3040-ly3T3048-ly2T1048-lb9T1048-lb9a

Table of Contents