Captive Portal Commands - Quanta Computer T5016-LB8D Use Manual

UANTA COMPUTER INC.

6.8.4 Captive Portal Commands

6.8.4.1 captive-portal mode
Use this command to enter the Captive Portal Configuration Mode.
Syntax
captive-portal
Default Setting
Command Mode
Global Config
6.8.4.2 captive-portal authentication timeout
This command configures the authentication timeout. If the captive portal user does not enter valid
credentials within this time limit, the authentication page needs to be served again in order for the client
to gain access to the network. The <timeout> variable is the authentication timeout and is a number in
the range of 60-600 seconds.
Syntax
authentication timeout <60-600>
no authentication timeout
Default Setting
300
Command Mode
Captive Portal Config
_____________________________________________________________________________
LB9 User's Guide
Layer 2/3/4 Managed Switch
367/1523