Configuration Commands - Quanta Computer T5016-LB8D Use Manual

UANTA COMPUTER INC.

7.4.2 Configuration Commands

7.4.2.1 bootpdhcprelay cidoptmode
This command enables the circuit ID option mode for BootP/DHCP Relay on the system.
Syntax
bootpdhcprelay cidoptmode
no bootpdhcprelay cidoptmode
no - This command is used to disable the circuit ID option mode for BootP/DHCP Relay on the
system.
Default Setting
Disabled
Command Mode
Global Config
7.4.2.2 bootpdhcprelay enable
This command enables the forwarding of relay requests for BootP/DHCP Relay on the system.
Syntax
bootpdhcprelay enable
no bootpdhcprelay enable
no - Disable the forwarding of relay requests for BootP/DHCP Relay on the system.
Default Setting
Disabled
Command Mode
Global Config
_____________________________________________________________________________
LB9 User's Guide
Layer 2/3/4 Managed Switch
744/1523