Iscsi Optimization Commands; Show Commands - Quanta Computer T5016-LB8D Use Manual

UANTA COMPUTER INC.

6.25 iSCSI Optimization Commands

This section describes commands you use to monitor iSCSI sessions and prioritize iSCSI packets. iSCSI
Optimzation provides a means of giving traffic between iSCSI initiator and target systems special Quality
of Service (QoS) treatment. This is accomplished by monitoring traffic to detect packets used by iSCSI
stations to establish iSCSI sessions and connections. Data from these exchanges is used to create
classification rules that assign the traffic between the stations to a configured traffic class. Packets in the
flow are queued and scheduled for egress on the destination port based on these rules.

6.25.1 Show Commands

6.25.1.1 show iscsi
This command displays the iSCSI settings.
Syntax
show iscsi
Default Setting
None
Command Mode
Privileged EXEC
Display Message
Example : show iscsi
iSCSI enabled
iSCSI vpt is 5
Session aging time: 10 min
Maximum number of sessions is 192
------------------------------------------------
iSCSI Targets and TCP Ports:
------------------------------------------------
TCP Port Target IP Address
860
3260
_____________________________________________________________________________
LB9 User's Guide
Name
-
-
-
-
Layer 2/3/4 Managed Switch
644/1523