Quanta Computer T5016-LB8D Use Manual page 239

UANTA COMPUTER INC.
6.3.8.2 ip javamode
This command specifies whether the switch should allow access to the Java applet in the header frame
of the Web interface. When access is enabled, the Java applet can be viewed from the Web interface.
When access is disabled, the user cannot view the Java applet.
Syntax
ip javamode
no ip javamode
no - This command disallows access to the Java applet in the header frame of the Web interface.
When access is disabled, the user cannot view the Java applet.
Default Setting
Enabled
Command Mode
Global Config
6.3.8.3 ip http port
This command is used to set the http port where port can be 1-65535 and the default is port 80.
Syntax
ip http port <1-65535>
no ip http port
<1-65535> - HTTP Port value.
no - This command is used to reset the http port to the default value.
Default Setting
80
Command Mode
Global Config
_____________________________________________________________________________
LB9 User's Guide
Layer 2/3/4 Managed Switch
239/1523