Managing Dns Relay Function - Quanta Computer T5016-LB8D Use Manual

UANTA COMPUTER INC.

11.2.17 Managing DNS Relay Function

11.2.17.1 Configuring DNS Relay Configuration Page
The DNS protocol controls the Domain Name System (DNS), a distributed database with which you can
map host names to IP addresses. When you configure DNS on your switch, you can substitute the host
name for the IP address with all IP commands, such as ping, telnet, traceroute, and related Telnet
support operations. To keep track of domain names, IP has defined the concept of a domain name
server, which holds a cache (or database) of names mapped to IP addresses. To map domain names to
IP addresses, you must first identify the host names, specify the name server that is present on your
network, and enable the DNS.
Configurable Data
Admin Mode - Select enable or disable from the pull down menu. When you select 'enable', the IP
Domain Naming System (DNS)-based host name-to-address translation will be enabled.
Default Domain Name - Default domain name used to complete unqualified host names. Do not
include the initial period that separates an unqualified name from the domain name. This is a text
string of up to 253 characters.
Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is performed.
_____________________________________________________________________________
LB9 User's Guide
Layer 2/3/4 Managed Switch
1100/1523