Ldap Configuration Commands - Quanta Computer T5016-LB8D Use Manual

UANTA COMPUTER INC.

6.8.6 LDAP Configuration Commands

6.8.6.1 ldap baseDN
Use this command to indicate the base DN.
Syntax
ldap baseDN <baseDN>
no ldap baseDN
<baseDN> - The top level of the LDAP directory tree.
no - This command is used to remove base DN setting.
Default Setting
None
Command Mode
Global Config
6.8.6.2 ldap ip
Use this command indicate the IP of LDAP server you want to connect.
Syntax
ldap baseDN <ipaddr>
no ldap ip
<ipaddr> - The LDAP server's IP address.
no - This command is used to remove LDAP server setting.
Default Setting
None
Command Mode
Global Config
_____________________________________________________________________________
LB9 User's Guide
Layer 2/3/4 Managed Switch
417/1523