Congestion-Notify Tag - Quanta Computer T5016-LB8D Use Manual

UANTA COMPUTER INC.

10.4.4 congestion-notify tag

The user can go to the CLI Global Configuration Mode to configure the CNTAG Ether Type is recognized
by parsing stages. Use the 'congestion-notify tag ethertype recognize' global configuration command.
Use the 'no congestion-notify tag ethertype recognize' to configure CNTAG Ether Type is unrecognized.
Syntax
congestion-notify tag ethertype recognize
no congestion-notify tag ethertype recognize
no - This command disables CN tag processing.
Default Setting
Enabled
Command Mode
Global Data-Center-Bridging Mode
The user can go to the CLI Global Configuration Mode to configure the Ether Type of CN-TAG. Use the
'congestion-notify tag ethertype <value>' global configuration command. Use the 'no congestion-notify
tag ethertype' to configure CN-TAG Ether Type to default value..
Syntax
congestion-notify tag ethertype <0-65535>
Default Setting
0x22e9
Command Mode
Global Data-Center-Bridging Mode
_____________________________________________________________________________
LB9 User's Guide
Layer 2/3/4 Managed Switch
956/1523