UANTA COMPUTER INC.
6.8.4.5 Captive-portal http port
This command configures an additional HTTP port. Valid port numbers are in the range of 0-65535,
excluding port numbers 80 and 443 which are reserved. The HTTP port default is 0 which denotes no
additional port and the default port (80) is used.
Syntax
http port <0-65535>
no http port
Default Setting
0
Command Mode
Captive Portal Config
_____________________________________________________________________________
LB9 User's Guide
Layer 2/3/4 Managed Switch
369/1523
Need help?
Do you have a question about the T5016-LB8D and is the answer not in the manual?