Ets Mode; Ets Scheduler-Type - Quanta Computer T5016-LB8D Use Manual

Layer 2/3/4 managed switch
Table of Contents

Advertisement

UANTA COMPUTER INC.

10.3.2 ets mode

The ETS function is disabled by default. Only after enabling it, the ETS process also starts.
Syntax
ets mode {auto | on}
no ets mode
auto – This command enables the DCBX ETS function
on – This command enables ETS function.
no - This command disables ETS function.
Default Setting
Disabled
Command Mode
Data-Center-Bridging Interface Mode

10.3.3 ets scheduler-type

This command configures the scheduler type for an interface. The scheduler type is WRR or WERR.
When the ETS is enabled, the default scheduler type is WERR.
Syntax
ets scheduler-type [wrr|werr]
no ets scheduler-type
WRR - Set ETS scheduler type to WRR
WERR - Set ETS scheduler type to WERR
no - This command restores the scheduler type to WERR.
Default Setting
werr
Command Mode
Data-Center-Bridging Interface Mode
_____________________________________________________________________________
LB9 User's Guide
Layer 2/3/4 Managed Switch
950/1523

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

T3040-ly3T3048-ly2T1048-lb9T1048-lb9a

Table of Contents