Managing Mac Filters - Quanta Computer T5016-LB8D Use Manual

UANTA COMPUTER INC.

11.3.14 Managing MAC Filters

11.3.14.1 Configuring MAC filter Configuration Page
Selection Criteria
MAC Filter - This is the list of MAC address and VLAN ID pairings for all configured filters. To
change the port mask(s) for an existing filter, select the entry you want to change. To add a new
filter, select "Create Filter" from the top of the list.
VLAN ID - The VLAN ID used with the MAC address to fully identify packets you want filtered. You
can only change this field when you have selected the "Create" option.
Configurable Data
MAC Address - The MAC address of the filter in the format 00:01:1A:B2:53:4D. You can only
change this field when you have selected the "Create Filter" option. You cannot define filters for
these MAC addresses:

00:00:00:00:00:00

01:80:C2:00:00:00 to 01:80:C2:00:00:0F

01:80:C2:00:00:20 to 01:80:C2:00:00:21

FF:FF:FF:FF:FF:FF

01:00:5E:00:00:00 to 01:00:5E:FF:FF:FF

33:33:00:00:00:00 to 33:33:FF:FF:FF:FF
Source Port Members - List the ports you want included in the inbound filter. If a packet with the
MAC address and VLAN ID you selected is received on a port that is not in the list, it will be dropped.
Command Buttons
Submit - Update the switch with the values on the screen. If you want the switch to retain the new
values across a power cycle you must perform a save.
Delete - Remove the currently selected filter.
Delete All - Remove all configured filters.
_____________________________________________________________________________
LB9 User's Guide
Layer 2/3/4 Managed Switch
1148/1523