UANTA COMPUTER INC.
10.3.4 ets weight
This command configures the weight ratio of the two priority groups (LAN and SAN) for an interface. The
sum of these two weight values should meet 100 in percentage. The default weights are 50 to 50.
Syntax
ets weight <1-99> <1-99>
no ets weight
<1 - 99> - weight values.
no - This command restores the weight values to 50 and 50.
Default Setting
50(LAN), 50(SAN)
Command Mode
Data-Center-Bridging Interface Mode
_____________________________________________________________________________
LB9 User's Guide
Layer 2/3/4 Managed Switch
951/1523