HTML Operation, cont'd
Creating or deleting a tie
Make or break a tie as follows:
1.
N Because of command length limitations in the browser, you can make a
N To tie an input to all outputs, click that input's input number.
2.
Global Presets page
You can save and recall global presets from the Global presets page (figure 5-12).
Access the Global presets page by clicking the Global Presets link on the left of the
Control page.
Select an
Output Group
For Ties
Refresh
Figure 5-12 — Global Presets page
5-14
FOX 4G Matrix 14400 Switcher • HTML Operation
Move the mouse over the matrix of input and output selection buttons. Click
a button to
•
Create a pending tie (if a tie does not exist) of the input and output
associated with that button
•
Create a pending untie (if a tie exists) of the input and output associated
with that button
A "P" (for pending) appears in the button.
maximum of 30 connections with a single Take command (step 2).
Click the Take button to make the configuration changes or the Cancel button
to abandon the configuration changes.