Appendix B • Specifications, Part Numbers, Accessories; Specifications - Extron electronics FOX 4G Matrix 14400 User Manual

Specifications, Part Numbers, Accessories

Specifications

N The I/O cards are class 1 laser products. They meet the safety regulations of IEC-60825, FDA 21
CFR 1040.10, and FDA 21 CFR 1040.11.
Optical specifications
Number/type ................................ 16 single mode or 16 multimode fiber optic inputs and outputs (16 TX and 16
Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is
N
required to transmit return data for bidirectional control/communication.
Connectors ..................................... 16 bidirectional LC connectors per I/O card
Operating distance ........................ 30 km (18.75 miles) with singlemode (SM) cables with a FOX 500 DA6 SM or
Operating distance is approximate. These are typical distances. The maximum distance may
N
be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth,
connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
Nominal peak wavelength........... 850 nm for multimode (MM), 1310 nm for single mode (SM)
Transmission power
Singlemode ......................... -5 dBm, typical
Multimode .......................... -5 dBm, typical
Maximum receiver sensitivity
Singlemode ......................... -18 dBm, typical
Multimode .......................... -12 dBm, typical
Optical loss budget
Singlemode ......................... 13 dB, maximum
Multimode .......................... 7 dB, maximum
Maximum channel data rate ........ 4.25 Gbps
Video
Routing ........................................... 16 x 16 up to 144 x 144 unidirectional (TX) matrix or
Gain ................................................. Unity
Pixel data bit depth ....................... 8 bits per channel, 3 channels (R, G, B)
Maximum resolution .................... 1600x1200 @ 60 Hz, digitized pixel for pixel; higher resolutions up to
Video/audio input
Number/signal type ..................... 16 to 144 fiber optic signals
Connectors ..................................... 16 LC connectors per I/O card
N Input comes from an Extron FOX 500 TX transmitter, FOX 500 DA6, or FOX 500 DVI
transmitter.
Video/audio output
Number/signal type ..................... 16 to 144 fiber optic signals
Connectors ..................................... 16 LC connectors per I/O card
Output connects to an Extron FOX 500 RX receiver or FOX 500 DVI receiver.
N
B-2 FOX 4G Matrix 14400 Switcher • Specifications, Part Numbers, Accessories
RX) per I/O card
FOX 500 TX/RX SM
0.15 km (492') with multimode (MM) cables with a FOX 500 DA6 MM or
FOX 500 TX/RX MM
8 x 8 up to 64 x 64 bidirectional (TX/RX) matrix
2048x1120, undersampled