Operation; Creating A Tie - Extron electronics CrossPoint 450 Plus Series Setup Manual

Operation

NOTE:
the CrossPoint switchers and "Video" on the MAV Plus
switchers. The two labels are used interchangeably in this
guide.

Creating a Tie

1. Press and release the
output button, or control button indicators that may be lit.
2.
Press and release the
select or deselect video, audio, or both, as desired.
Green when selected.
3. Press and release the desired input button.
The button lights to indicate the selection.
4.
Press and release the desired output button(s).
Amber indicates RGBHV/video and audio tie.
Green indicates RGBHV/video only tie.
Red indicates audio only tie.
5. Press and release the
off.
The video selection button is labeled "RGBHV" on
Off when deselected.
NOTE: Audio or video can be broken away (tied by itself)
by selecting only the Video button or only the Audio
button.
5
3 4
CrossPoint / MAV Matrix Switchers • Operation
button to clear any input button,
Esc
button,
Video Audio
I / O
Red when selected.
RGBHV AUDIO
Off when deselected.
8
ENTER
Green indicates the
need to confirm the
change.
button. All button indicators turn
Enter
button, or both to
9