Creating Or Deleting A Tie - Extron electronics MPX Plus 866 A User Manual

HTML Operation, cont'd

Creating or deleting a tie

Make or break a tie as follows:
1.
2.
N If you lose track of the input and output associated with a specific button, let the
N To tie an input to all outputs, click that input's input number.
3.
6-16 MPX Plus 866 A Media Presentation Matrix Switcher • HTML Operation
Click the Video Only, Audio Only, or Video & Audio button to select video,
audio, or both for switching (audio breakaway or audio follow). Each mouse
click on a button toggles the other two buttons off.
Move the mouse over the matrix of input and output selection buttons. Click
a button to
• Create a pending tie (if a tie does not exist) of the input and output
associated with that button
• Create pending untie (if a tie exists) of the input and output associated
with that button
A "P" (for pending) appears in the button.
mouse rest over one of the tie buttons for a moment. A field pops up (as shown
on figure 6-12) that identifies the input and output for that button.
Click the Take button to make the configuration changes or the Cancel button
to abandon the configuration changes.