Administrator Password And User Password Fields; Mail Server Ip Address Field - Extron electronics FOX 4G Matrix 14400 User Manual

Matrix Software, cont'd

Administrator Password and User Password fields

The Administrator Password field displays the password required to log on to the
matrix switcher via the Ethernet port with all of the administrator's rights and
privileges. The User Password field displays the password required to log on to the
matrix switcher via the Ethernet port as a user, without all of the administrator's
rights and privileges. Passwords are case sensitive and are limited to 12 upper-case
and lower-case alphanumeric characters.
While you are logged on as a user, both password fields are masked with asterisks
(************) as a security measure.
N Editing the Administrator Password field while connected via the Ethernet port
N An administrator password must be created before a user password can be
N The following characters are invalid in passwords:
Edit either password field as follows:
1.
2.
3.
4.

Mail Server IP Address field

The Mail Server IP Address field displays the IP address of the mail server
that handles the e-mail for the facility in which the matrix switcher is installed.
Standard IP protocol rules apply to the Mail Server IP address.
Edit this field as follows:
1.
2.
3.
4.
4-10 FOX 4G Matrix 14400 Switcher • Matrix Software
can immediately disconnect the user from the switcher. Extron recommends
editing this field using one of the serial ports and protecting the Ethernet
access to this screen by assigning an administrator's password to qualified and
knowledgeable personnel only.
created.
{space} + ~ , @ = ' [ ] { } < > ' " ; : | \ and ?.
Click in the desired Password field. The pointer tool becomes a text cursor.
Edit the case-sensitive password as desired.
Press the key on the keyboard or click in another field to exit the Password
Tab
field.
Click the Take button to make the password change take effect.
Click in the mail server IP address field. The pointer tool becomes a text
cursor.
Edit the IP address as desired.
Press the key on the keyboard or click in another field to exit the mail
Tab
server IP address field.
Click the Take button to make the address change take effect.