Updating Firmware - Extron electronics FOX 4G Matrix 14400 User Manual

Matrix Software, cont'd

Updating firmware

The firmware upgrade utility provides a way to replace the firmware that is coded
on the switcher's control board without taking the switcher out of service.
Update the switcher firmware as follows:
1.
NOTE This sequence is shown for
example only.
For the FOX 4G Matrix 14400,
the firmware file selected and
shown is "FOX 4G Matrix 14400".
Figure 4-9 — Location of firmware upgrade files
2.
3.
4.
5.
N Note the folder to which the firmware file is saved.
6.
4-12 FOX 4G Matrix 14400 Switcher • Matrix Software
Visit the Extron Web site, www.extron.com, click the Download tab, and then
click the Firmware link (figure 4-9).
1
Select the appropriate firmware file (FOX 4G Matrix 14400) to download and
click Download.
Enter the requested personal information and then click Download to copy the
firmware to your computer.
Click Run on the next two screens (figure 4-10 on the next page). The PC
downloads the firmware update from the Extron Web site and starts the
Extron Installation Program to extract the firmware file.
Click Next. The program extracts the firmware files and places them in a
folder identified in the InstallShield Wizard window.
Click Finish to exit the program.
3
3
1
2