Installing A Fan Module - Extron electronics FOX 4G Matrix 14400 User Manual

Installing a fan module

1. Orient the fan to be installed so that the printing on the back of the panel is
right-side up.
2. Align the flanges on the fan with the top and bottom fan guides (figure 6-4).
3. Gently slide the fan into the enclosure until the fan meets resistance.
4. Gently seat the fan in the backplane.
5. Tighten the top and bottom knurled knobs/captive screws to lock the fan in
place.
N If necessary, use a screwdriver to tighten the knurled knobs/captive screws.
6. Secure the row identification plate to the fan.
FOX 4G Matrix 14400 Switcher • Maintenance and Modifications 6-7