Download  Print this page

Digital Extra Device Port (digital Xdp) Connection - Panasonic KX-TDA15 Installation Manual

Hybrid ip-pbx.
Hide thumbs

Advertisement

2.6.3

Digital EXtra Device Port (Digital XDP) Connection

A DPT can be connected to another DPT on the Digital XDP connection. In addition, a DPT connected to a
Super Hybrid Port can also have an SLT connected in Parallel mode or XDP mode.
Notes
Both DPTs must be KX-T7600 series DPTs (except KX-T7640). Note that the KX-T7667 can only
be connected as a slave DPT.
Parallel mode or XDP mode can be selected through system programming.
If XDP mode is enabled through system programming, parallel connection is not possible. Refer to
"1.10.9 Parallelled Telephone" and "2.1.1 Extension Port Configuration" in the Feature Guide for
further information.
With KX-T7600 Series DPT (except KX-T7600E Series)
Using a Modular T-Adaptor
To a Super Hybrid Port
4-conductor wiring cord
Connect pins "D1" and
"D2".
Back View of DPTs
TO TEL
TO MAIN UNIT
/ PABX
Master DPT
Cable
ø 0.4 mm:
ø 0.5 mm:
ø 0.6 mm:
CAT 5:
Master DPT
To a Super Hybrid Port
Modular
T-Adaptor
2-conductor wiring cord
Connect pins "T" and "R".
4-conductor wiring cord
Connect pins "D1" and "D2".
Slave DPT
Maximum Distance
30 m
50 m
60 m
50 m
Slave DPT
2.6 Connection of Extensions
SLT
TO MAIN UNIT
/ PABX
Installation Manual
89

Advertisement

Table of Contents

   Also See for Panasonic KX-TDA15

   Related Manuals for Panasonic KX-TDA15

Comments to this Manuals

Symbols: 0
Latest comments: