Using an Answering Machine
Printer
To the
wall jack
You can connect a telephone answering device (TAD) directly to the rear of your printer as shown
above.
•
Set your printer to Ans Machine/Fax and set Auto Rec Ans/FAX to specify the time for the
TAD to respond.
•
When the TAD picks up the call, the printer monitors and takes the line if fax tones are received
and then starts receiving the fax.
•
If the answering device is off, the printer automatically goes into the fax receive mode after the
ring tone sounds for a predefined time.
•
If you answer the call and hear fax tones, the printer will answer the fax call if you
–
Set OnHook to On (you can hear voice or fax tones from the remote machine), and then
press the
–
Press the two-digit remote receive code and hang up the receiver.
282
Faxing (DocuPrint CM215 f/CM215 fw Only)
Line
Telephone Answering Device
(Start) button and hang up the receiver.
Phone