Fuji Xerox DocuPrint CM215 Series User Manual page 320

• Initialize NVM
Purpose:
To initialize NVM for system parameters,
After executing this function and rebooting the printer, the menu parameters or data, except the
parameters for the network, are reset to their factory default values.
on the DocuPrint CM215 f/CM215 fw.)
See also:
• "Resetting to Factory Defaults" on page 343
Values:
DocuPrint CM215 f/CM215 fw:
User Fax
Section
User Scan
Section
System Section
DocuPrint CM215 b:
System Section
• Non-Genuine Mode
Purpose:
To use toner cartridges
NOTE:
• Using non-genuine
decrease the reliability of your printer. Fuji Xerox recommends only new Fuji Xerox brand
your printer. Fuji Xerox does not provide warranty coverage for problems caused by using consumables not
supplied by Fuji Xerox.
• Before you use toner cartridges
Values:
Off*
On
320 Using the Operator Panel Menus and Keypad
Address Book
Yes
No*
Yes
No*
Yes
No*
Yes
No*
of another manufacturer.
toner cartridges may make some printer features unusable, reduce print quality and
of another manufacturer, be sure to restart the printer.
data for fax, or
Initializes the fax number entries in the
Does not initialize the fax number entries in the
Initializes the e-mail and server address entries in the
Book.
Does not initialize the e-mail and server address entries in the
Address Book.
Initializes the system parameters.
Does not initialize the system parameters.
Initializes the system parameters.
Does not initialize the system parameters.
Does not use toner cartridges
Uses toner cartridges of another manufacturer.
Address Book data for e-mail.
(Address Book is available only
Address Book.
Address
toner cartridges
of another manufacturer.
Book.
Address
for