Sharpness - Fuji Xerox DocuPrint CM215 Series User Manual

Sharpness

Adjust the sharpness to make the copy sharper or softer than the original.
1
For the DocuPrint CM215 f/CM215 fw, firstly load the top edge of document(s) with facing up into
the ADF or place a single document facing down on the
cover.
For the DocuPrint CM215 b, place a single document facing down on the
close the document
See also:
• "Making Copies From the ADF (DocuPrint CM215 f/CM215 fw Only)" on page 166
• "Making Copies From the Document Glass" on page 164
2
Press the (Copy) button.
3
Select Sharpness, and then press the
4
Select the desired settings, and then press the
NOTE:
• Asterisk (*) is the factory default setting.
Sharpest
Sharper
Normal*
Softer
Softest
5
If necessary, customize the copy settings such as the number of copies, copy size, and image
quality.
See also:
• "Setting Copy Options" on page 167
6
Press the (Start) button to begin copying.
176 Copying
cover.
Makes the copy sharper than the original.
Does not make the copy sharper or softer than the original.
Makes the copy softer than the original.
document glass
button.
button.
and close the document
document glass, and