Fuji Xerox DocuPrint CM215 Series User Manual page 78

• Manual SSID Setup
1
Press the (System) button.
2
Select Admin Menu, and then press the
3
Select Network Setup, and then press the
4
Select Wireless Setup, and then press the
5
Select Manual Setup, and then press the
6
Enter the SSID, and then press the
7
Select the network mode from Infrastructure and Ad-hoc depending on your environment,
and then press the
If you select Infrastructure, proceed to step 8.
If you select Ad-hoc, proceed to step 9.
8
Select the encryption type from Mixed Mode PSK, WPA-PSK-TKIP, WPA2-PSK-AES, or WEP.
IMPORTANT:
• Be sure to use one of the supported encryption methods to protect your network traffic.
To use Mixed Mode PSK, WPA-PSK-TKIP, or WPA2-PSK-AES encryption:
Select Mixed Mode PSK, WPA-PSK-TKIP, or WPA2-PSK-AES, and then press the
a
button.
Enter the passphrase, and then press the
b
NOTE:
• A passphrase is an encryption key for WPA and WPA2 encryption which consists of 8 to 63 alphanumeric
characters. It may be described as a key on some access points or routers. For details, refer to the
manual supplied with the access point or router.
Proceed to step 10.
c
To use WEP encryption:
Select WEP, and then press the
a
Enter the WEP key, and then press the
b
Select the desired transmit key from Auto or WEP Key 1 to WEP Key 4, and then press the
c
button.
Proceed to step 10.
d
9
Select WEP for the encryption type.
IMPORTANT:
• Be sure to use one of the supported encryption methods to protect your network traffic.
Select WEP, and then press the
a
Enter the WEP key, and then press the
b
Select the desired transmit key from WEP Key 1 to WEP Key 4, and then press the
c
button.
10
Confirm that Restart Printer to apply settings appears.
78 Printer Connection and Software Installation
button.
button.
button.
button.
button.
button.
button.
button.
button.
button.
button.