Printing And Checking The System Settings Page - Fuji Xerox DocuPrint CM215 Series User Manual

Printing and Checking the
Print the System Settings
Using the Operator Panel
1
Press the (System) button.
2
Select Report / list, and then press the
3
Select System Settings, and then press the
The System Settings
4
On the Network Setup or Wireless Setup section of the
address next to IP Address under the IPv4 heading. If the IP address is 0.0.0.0, wait for a few
minutes to resolve the IP address automatically, and then print the
If the IP address is not resolved automatically, see
page 82.
Using the Printer Setting Utility
The following procedure uses Windows 7 as an example.
1
Click Start → All Programs
your printer → Printer Setting Utility.
NOTE:
• The Select Printer window appears in this step, when multiple print drivers are installed on your
computer. In this case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility
2
Click the System Settings Report tab.
3
Select Information Pages from the list at the left side of the page.
The Information Pages page is displayed.
4
Click the System Settings button.
The System Settings
If the IP address is 0.0.0.0 (the factory default) or 169.254.xx.xx, an IP address has not been
assigned.
See also:
• "Assigning an IP Address Manually" on page 82
page and check your printer's IP address.
page is printed.
→ Fuji Xerox
appears.
page is printed.
System Settings
button.
button.
System Settings
"Assigning an IP Address Manually" on
(Windows Only)
→ Fuji Xerox Printer Software for Asia-Pacific
Printer Connection and Software Installation
Page
page, confirm the IP
System Settings page again.
→
85