• Auto SSID Setup
1
Press the
(System) button.
2
Select Admin Menu, and then press the
3
Select Network Setup, and then press the
4
Select Wireless Setup, and then press the
The printer automatically searches the access points on wireless network.
5
Select the desired access point, and then press the
If the desired access point does not appear, go to
NOTE:
•
Some hidden SSID may not be displayed. If the SSID is not detected turn on SSID broadcast from the
access point.
6
Enter the passphrase or WEP key.
When the encryption type of the access point selected in step
•
Enter the passphrase, and then press the
When the encryption type of the access point selected in step
•
Enter the WEP key, and then press the
NOTE:
•
A passphrase is an encryption key for WPA and WPA2 encryption which consists of 8 to 63 alphanumeric
characters. It may be described as a key on some access points or routers. For details, refer to the
manual supplied with the access point or router.
7
Confirm that Restart Printer to apply settings appears.
8
Turn off the printer, and turn it on again to apply the settings.
Wireless LAN connection setting is complete.
button.
button.
button.
button.
"Manual SSID Setup" on page
5
button.
5
button.
Printer Connection and Software Installation
78.
is WPA, WPA2 or Mixed:
is WEP:
77