Fax Broadcast - Fuji Xerox DocuPrint CM215 Series User Manual

• Fax Broadcast

Purpose:
To set whether to print a transmission report after every fax transmission to multiple destinations or
only when an error occurs.
Values:
Print Always*
Print On Error
Print Disable
• Region
Purpose:
To select the region where the printer is used.
System Settings
Use the System Settings menu to configure a variety of printer features.
NOTE:
• Asterisk (*) is the factory default setting.
• Power Saving Timer
Purpose:
To specify the time for transition to the
Values:
Low Power
Timer
Sleep Timer
Select 5min (default) for Low Power Timer if your printer shares an electrical circuit with your room
lights and you notice them flickering. Otherwise, select a high value to keep your printer available for
frequent use with the minimum warm-up time.
The printer automatically returns to the standby mode from the
data from the computer. In the
by pressing any button on the
standby mode by pressing the
Prints a transmission report after every fax transmission.
Prints a transmission report only when an error occurs.
Does not print a transmission report after a fax transmission to
multiple destinations.
Power Saver
Specifies the time taken by the printer before it enters the
5min*
Power
5–30min
Specifies the time taken by the printer before it enters the
6min*
Sleep
1–6min
Low Power mode, you can also return the printer to the standby mode
operator panel. In the
(Energy Saver) button.
Using the Operator Panel Menus and Keypad
mode.
mode after it finishes a job.
mode after it goes into the
Power Saver mode
Sleep mode, you can return the printer to the
Low Power mode.
when it receives
Low
313