Wireless Problems (Docuprint Cm215 Fw Only) - Fuji Xerox DocuPrint CM215 Series User Manual

Wireless Problems (DocuPrint CM215 fw Only)

Problem
Cannot setup wireless
connection.
Cannot setup wireless connection
with WPS (Wi-Fi Protected
®
Setup ).
Cannot setup wireless connection
with the WPS-PBC (Wi-Fi
Protected Setup-Push Button
Configuration).
Cannot setup wireless connection
with WPS-PIN (Wi-Fi Protected
Setup-Personal Identification
Number).
396 Troubleshooting
Action
Make sure that the Ethernet cable is disconnected from the printer.
Make sure that Wi-Fi is set to On.
See also:
• "Wireless Setup (DocuPrint CM215 fw Only)" on page 301
Try disabling the firewall on your computer. The firewall on your
computer may be blocking communication with your printer.
Make sure that the security setting of the wireless LAN access point
or router is WPA or WPA2. (WEP is not supported on WPS.)
Press the WPS button on the wireless LAN access point or router
within two minutes after starting the WPS operation on the printer. For
details about the wireless LAN access point or router, refer to the
manual supplied with the wireless LAN access point or router.
Check if the PIN you have entered on the computer is correct.