For Mac OS X
NOTE:
•
The following procedure uses Mac OS X 10.8
buttons may be different from those given in the following procedure depending on the OS and application you
are using.
•
When using a USB connection on Mac OS X 10.4.11, upgrade Common Unix Printing System (CUPS)
software to version 1.2.12 or later. You can download it from CUPS web site.
•
To use this feature, you must install the fax driver.
See also:
• "Configuring Printer and Installing Software on Mac OS X" on page 107
1
Open the file you want to send by fax.
2
Open the print window from the application, and then select your fax driver.
3
Specify the fax settings.
NOTE:
•
The settings done here are only applied to a single fax job.
4
Click Print.
The Fax Recipient window appears.
5
Specify the destination for the recipient in one of the following ways:
•
Specify a recipient directly.
Enter a name and phone number directly.
a
Click Add to Recipient List.
b
OR
•
Select a recipient from the
Click Look Up Phone Book.
a
The Phone Book window appears.
Select a recipient and then click Add to Recipient List.
b
Click Close.
c
TextEdit
as an example. The names of the windows and the
Phone Book
saved on your computer.
Faxing (DocuPrint CM215 f/CM215 fw Only)
259